Signal Integrity

RSS

At this week’s 2018 IEEE International Interconnect Technology Conference (IITC 2018), imec, will present 11 papers on advanced interconnects, ranging from extending Cu and Co damascene metallization, all the way to evaluating new alternatives such as Ru and graphene.

With the MAX22505 ±40V high-speed USB fault protector from Maxim Integrated Products, Inc., designers can now eliminate USB port damage from all faults, including ground potential differences, up to ±40V without the tradeoffs required by competing solutions. It protects data and power lines from industrial equipment powered at 24V_AC and 40V_DC, while also reducing solution size by more than 50% for industrial voltage applications.

Eric Bogatin explains the figures of merit in the time and frequency domain, and he steps through how to get a rough measure of the highest frequency components in a signal.

Eric Bogatin will lead this special session again at EDI CON USA, taking on the topic of how to deliver more than 100A with less than 10 mV of noise to digital devices. See how you can get involved.

Yuiry Shelpnev argues that simulating a link in isolation from the rest of the board (localization) is probably the most important requirement to simulate interconnects predictably. Read on to understand this important concept.

This article examines the key noise processes involved in measurements of jitter and phase noise, shows how these processes impact test results for various types of test equipment, and provides insight for interpreting these results.

If we know how to design interconnects that correlate with the measurements for 28 Gbps NRZ, is it going to be a "free lunch" to move to 56 Gbps NRZ? Not so easily, as I learned recently. Read on to see how you can benefit from some analysis and validating your tools.

Silicon Labs has introduced a new family of low-power PCI Express® (PCIe®) Gen 1/2/3/4 clock buffers that provide ultra-low jitter clock distribution in 1.5 V and 1.8 V applications.

Nyquist frequency, first harmonic, clock frequency, fundamental frequency, and some other intimidating terms might be thrown at you by an SI engineer. Read on to get up to speed on these and other terms you need to know.

When I first started studying Maxwell’s Equations, I was always intrigued by its mathematical finesse. How could someone think of that? Today we take them for granted and we sometimes forget how amazing they are and what a genius the guy was. In my view, James Maxwell should be with, if not above, Einstein and Newton among the greatest physicists to ever live, but outside our field people seldom know who Maxwell was.