Items Tagged with 'Ground Loop'

As currents increase and voltage rails shrink, managing fluctuations becomes a critical challenge. While probe noise is a major factor, the common-mode noise induced by the ground loop between the high-current DUT and the oscilloscope is often the more dominant disruptor in high-current AI environments. This experiment proves that simply switching oscilloscope vendors will not solve the problem. Read on to learn why the solution lies in the probing chain.

Having determined the amount of CMRR needed for 2-port measurement in the previous installment of this blog, Steve Sandler and  Benjamin Dannan return with a demonstration of how to create a DUT and make a 40 µΩ impedance measurement with the 2-port probe.

In this blog, Steve Sandler and Benjamin Dannan demonstrate how to determine how much CMRR is needed when introducing a ground loop isolator to correct the error in a 2-port measurement. 

When you make a 2-port shunt through measurement using a commercial vector network analyzer the measurement includes an undesirable ground loop. Left uncorrected, the ground loop introduces significant errors. This paper shows how to solve this problem.