Items Tagged with 'Bode plot'

This extreme measurement seems more impossible than difficult.  The traditional stability assessment method for voltage regulators is the Bode plot.  Access to the control loop is required and a small signal is injected into the control loop, usually via a resistor, placed at the top of the voltage sense divider. Without access to this voltage divider, there isn’t a place to inject a signal into the control loop, and therefore the Bode plot is seemingly impossible…

SIJ editorial advisory board member Yuriy Shlepnev offers a comparison of three ways to visualize the same s-parameter data, identifying how to get the most information from a plot.

In this tongue-in-cheek experiment that leads to actionable conclusions, Ben Dannan and Steve Sandler set out to discover a method to mitigate the lack of an isolation calibration step on a VNA.