LinkedIn

February 6, 2018

Sponsored by: EDI CON USA

EDI CON USA

Solve PI Problems in FPGA

Solve Power Integrity Problems in FPGA Systems Using an Embedded Vector Network Analyzer

By Cosmin Iorga

This article presents a method for power integrity analysis in FPGA systems by configuring the FPGA to function as a vector network analyzer (VNA) test instrument for its own power distribution network (PDN).


EB Blog

DesignCon PDN Tutorial Challenges the Way We Think About Fundamental Electrical Engineering

By Eric Bogatin

 

In our first electrical engineering class, we learn that the voltage across an inductor is L di/dt. We are ingrained with the idea that the voltage across an inductor is generated by the changing current through it. Not so, says Larry Smith, industry Power Integrity expert from Qualcomm and member of the SIJ EAB.

Advertisement

R&S

Accurate and Fast Power Integrity Measurements

Rohde & Schwarz

Measuring ripple, noise and transients on today’s low-voltage DC power rails challenges most oscilloscopes. Download the app note for more information.

 


SIJ First Print Issue

Signal Integrity Journal Publishes First Print Issue

Signal Integrity Journal, covering signal integrity, power integrity and EMC/EMI related topics, has published its first printed magazine issue. Signal Integrity Journal was launched in September 2016 as an online magazine, and is now celebrating its success with this 2018 print edition (which is also available as a digital e-book). The magazine issue is available in print, distributed at worldwide SI/PI/EMI events, and as a .pdf download online.

Samtec

Samtec’s New Edge Card Connectors for Higher Speeds and Proper Alignment

Samtec has expanded their line of edge card connectors with 0.80 mm and 1.00 mm pitch sockets designed for higher speed applications and optimal mating alignment. The 0.80 mm pitch socket (HSEC8-DP Series) is a differential pair version of Samtec’s popular Edge Rate® 0.80 mm pitch sockets.


 
SIJ eLearning Banner

Upcoming Webinars

Samtec Logo

Effective Return Loss for 112G and 56G PAM 4

This presentation proposes using a pulse echo for time domain reflectometry (TDR) rather the commonly used step function echo. The echoed pulse response of a single symbol is convolved with the modulation signal levels to produce an effective reflection coefficient metric at a specified bit error ratio (BER). Learn more.

Visit our archived webinars page for educational resources on various design and measurement subjects and view at your convenience.
Browse webinars here.

 

The preceding is from Signal Integrity Journal™, owned by Horizon House Publications Inc., at 685 Canton St., Norwood, MA, 02062, USA. We are online at www.signalintegrityjournal.com and are also available at 781-769-9750. Copyright © 2018. All Rights Reserved. Your email address has not been given to any Third Parties. You have been selected to receive this email because you opted-in to receive information when you provided your email address to Signal Integrity Journal™. To ensure deliverability of emails from Signal Integrity Journal™, we recommend that you whitelist our domain address: mwjournalemails.com.

Unsubscribe/Update Profile | Browser View | Forward to a Friend | Privacy | Subscribe to Signal Integrity Journal