Industry News

TELEDYNE LECROY NYHQ

Teledyne LeCroy and Anritsu Integrate Best-in-Class Solutions to Create Industry’s Most Comprehensive PCI Express® 4.0 Test System

Teledyne LeCroy, Inc. and Anritsu Company U.S. announce today a partnership to provide the industry’s most capable PCI Express 4.0 (PCIe Gen4) test solution, integrating the Anritsu Signal Quality Analyzer (SQA) MP1900A BERT with the LabMaster 10Zi-A oscilloscope and QPHY-PCIe4-Tx-Rx software from Teledyne LeCroy. This comprehensive system provides high-speed IC, device, and network engineers with one complete solution to conduct automated transmitter and receiver compliance tests, as well as link equalization verification.


Read More
Samtec Direct Connect

Samtec Enhances Direct Connect™ Cable Systems With New DCH Series

High-speed, press-fit termination simplifies direct connection to PCBs

Samtec, a privately held $662MM global manufacturer of a broad line of electronic interconnect solutions, proudly announces the release of the Direct Connect™ Horizontal (DCH) High-Speed Press-Fit Twinax Cable Assembly. This new solution expands Samtec’s Direct Connect™ Cable Systems targeted for cost-effective, high-performance flyover or co-planar, right angle and parallel board-to-board applications.


Read More
EMCP2017

AT&S Enables "Cool" Designs for Miniaturized High-Power Applications

Embedded and Inserted Heat Pipes Significantly Improve Heat Dissipation

Miniaturization and increasing power densities are major concerns for modern electronic applications. The lifetime of electronic applications can be dramatically reduced by the increase of the working temperatures by just a few degrees.Further, the insulation of the whole printed circuit board (PCB) from the environment in order to provide efficient protection against humidity and dust for certain applications turns heat dissipation an even more challenging task.


Read More
EDI CON Keynote

EDI CON USA Announces Keynote Speakers

To add to its high-quality line-up of education, EDI CON USA announced its plenary keynote speakers, Scott McMorrow, Dr. Thomas Cameron and Faride Akretch, for the conference and EXPO on September 11-13 at the Hynes Convention Center in Boston, Mass.


Read More
Passive Plus Article 8.23

PASSIVE PLUS, INC. PRODUCT SPOTLIGHT: 0805N 1111N Series

Passive Plus, Inc. (PPI) offers a Low ESR/ESL EIA capacitor series. These multi-layer capacitors have been developed for High-Q and Microwave applications including base station products and L/C filters. The 0805N and 1111N series capacitors have high self-resonance frequencies (to 25 GHz), exhibit NP0 characteristics, and are 100% RoHS compliant.


Read More
TEC STRADA

TE Connectivity Introduces Cabled STRADA Whisper Connectors

New Solution Delivers 25-50 Gbps Performance with Low Insertion Loss & High Flexibility

TE Connectivity (TE), a world leader in connectivity and sensors, today announced its cabled STRADA Whisper product line. Cabled STRADA Whisper connectors eliminate the need for printed circuit board (PCB) backplanes to achieve improved performance and flexibility as data speeds increase.


Read More
Anaren Building

ANAREN ANNOUNCES NEW LINE OF RADIATION HARDENED ISOLATED DC-DC CONVERTERS FOR HARSH SPACE ENVIRONMENTS

Anaren, Inc. announced today that it has released a new radiation hardened, isolated DC-to-DC converter for the high reliability space market. The MSK7010RH is a series of 10W DC-to-DC converters that are radiation hardened by design to provide reduced sensitivity to space radiation including; total ionizing dose, single event effects and displacement damage. The use of magnetic isolation eliminates the risk associated with traditional opto-isolator feedback.


Read More
Inverter DCDC Converter

2A, 2MHz, 60V Boost/SEPIC/Inverter DC/DC Converter with IQ = 9µA

Analog Devices, Inc., which recently acquired Linear Technology Corporation, announces the LT8362, a current mode, 2MHz step-up DC/DC converter with an internal 2A, 60V switch. It operates from an input voltage range of 2.8V to 60V, suitable for applications with input sources ranging from a single-cell Li-Ion battery to automotive and industrial inputs.


Read More
Microsemi Product

Microsemi Awarded Contract to Accelerate Adoption of Silicon Carbide Technology as New Member of PowerAmerica

Company to Develop State-of-the-Art 1.7 kV and 3.3 kV SiC MOSFETS and Diodes as Part of PowerAmerica Institute’s $70 Million Backing From the U.S. Department of Energy Over Five Years

Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced it has become a member of PowerAmerica—a manufacturing institute comprised of public and private representatives from the semiconductor industry, the U.S. Department of Energy, national laboratories and academia—to accelerate the commercialization and adoption of wide band gap semiconductors.


Read More