June 27, 2017

Sponsored by: Rohde & Schwarz

Sierra Circuits

Featured Article

Beware of Misinterpreting Measurements Without This Key Piece of Information

By Eric Bogatin

There is one key missing ingredient which we have to have in order to interpret the measurement. You cannot correctly interpret measurements without this key piece of information.


EDI CON USA 2017 Announces Short Courses
By EDI CON 2017

Organizers of EDI CON have invited industry experts to teach three-hour short courses on relevant topics necessary for success in today’s high-speed and high-frequency designs. EDI CON USA 2017 takes place at the Hynes Convention Center, September 11-13 in Boston, Mass.



Rogers Introduces New RO1200 Low Loss PCB Laminate
By Signal Integrity Journal

Signal Integrity Journal interviews Mahyar Vahabzadeh of Rogers about the newly introduced high speed, low loss RO1200.

Linear Technology Corp

750 mA Synchronous Step-Down DC/DC Converter Delivers 93% Efficiency at 2 MHz
By Analog Devices Inc. and Linear Technology Corp.

Analog Devices, which recently acquired Linear Technology Corporation, announces the LT8607, a 750 mA, 42 V input synchronous step-down switching regulator.



Rohde and Schwarz

Accurate and fast power integrity measurements
By Rohde & Schwarz

Measuring ripple, noise and transients on today’s low-voltage DC power rails challenges most oscilloscopes. With smaller rail voltages and 1 % to 2 % tolerances, instrument and probing noise make it hard to accurately measure specified tolerances. Adequate bandwidth is required to see harmonics of fast edges and higher frequency sources that can be coupled on power rails.



EMC + SIPI 2017

Can’t attend EMC + SIPI in person, register for the online symposium and you will never have to leave your desk to learn the latest in EMC and SIPI.



The preceding is from Signal Integrity Journal™, owned by Horizon House Publications Inc., at 685 Canton St., Norwood, MA, 02062, USA. We are online at and are also available at 781-769-9750. Copyright © 2017. All Rights Reserved. Your email address has not been given to any Third Parties. You have been selected to receive this email because you opted-in to receive information when you provided your email address to Signal Integrity Journal™. To ensure deliverability of emails from Signal Integrity Journal™, we recommend that you whitelist our domain address:

Unsubscribe/Update Profile | Browser | Forward | Privacy | Register for Signal Integrity Journal site