Industry News

RSS

Flex Power Modules announced the release of the PKJ4000 series of DC/DC converters primarily targeting radio frequency power amplifier (RFPA) applications within the telecom market segment. The PKJ4000 series delivers 28V DC or 50V DC at up to 700W of power from an input voltage range of 36V to 75V.

TDK Corporation has expanded the MAF1005G series of noise suppression filters for audio lines with four new MAF1005GAD-D types, which, thanks to their low DC resistance, feature a high rated current of up to 1.25 A. 

Infineon Technologies is launching two new System Basis Chip (SBC) families: Lite and Mid-Range+. They are the first SBCs on the market supporting the ISO CAN FD protocol for communication at 5 Mbit/s for a large variety of automotive applications.

Samtec, announces the Flyover™ QSFP28 Cable System. This new system can support 28G NRZ/56G PAM 4 data rates per channel, and it provides system design flexibility. Samtec’s Flyover™ QSFP28 Cable System allows sideband signaling via press-fit contacts to improve airflow, reduce loss, and mitigate skew.

TE Connectivity (TE), announced the release of its new ParaByte transceiver. The release of this rugged parallel optical transceiver marks TE’s first launch of an optical transceiver capable of achieving 10+ GB/s while also meeting standards for rugged performance.

The R&S IQW wideband I/Q data recorder can be used to record signal scenarios typically required in test cases at a bandwidth up to 512 MHz and high sampling rates. The solution records wideband RF signals and reproduces them to simulate real-world test environments, enabling realistic, repeatable device tests in the lab.

Samtec supports the release of the new ANSI/VITA 57.4-2018 FPGA Mezzanine Card Plus Standard. VITA 57.4, also referred to as FMC+, expands upon the I/O capabilities defined in ANSI/VITA 57.1 FMC by adding two new connectors that enable higher data rates.

Samtec, announces the release of the two new FireFly™ FMC+ Development Kits. The first supports data rates of 25 Gbps per channel while the second runs at 28 Gbps per channel. These new solutions offer easy-to-use evaluation and development platforms for Samtec’s FireFly™ optical engines.

LPKF Laser & Electronics has announced it will be demonstrating its in- house rapid PCB prototyping equipment at the EDI CON 2018 exhibition, which takes place October 17th-18th at the Santa Clara Convention Center in Santa Clara, CA.