5 Series mixed signal oscilloscope (MSO). With numerous enhancements, the 5 Series B MSO delivers even more versatility while continuing to provide high-fidelity waveforms, spectrum analysis capabilities, and flexible signal access.
The second-generation IsoVu probes extend the applications for isolated probe technology to the entire power system design market with a smaller size, improved ease of use, and enhanced electrical performance.
Tektronix, Inc. announced the TBS2000B Series of Digital Storage Oscilloscopes that was developed to meet the performance, usability, and affordability needs of both engineers and educators. The TBS2000B scopes extend the performance of the TBS2000 portfolio to 200 Mhz with 2GS/s maximum sample rate. The TBS2000B introduction comes shortly after the release of Tektronix’s Series 3 and 4 Series Oscilloscopes, as the organization remains committed to investing in a broad portfolio of benchtop solutions.
Tektronix has expanded its line-up of PAM4 test solutions to include comprehensive 400G electrical compliance testing for OIF-CEI-56G VSR/MR/LR PAM4 standards. The new 400G-TXE software package runs on high-performance Tektronix DPO70000SX Real-Time Oscilloscopes; a lineup of models which go up to 70 GHz in bandwidth. The automated turnkey solution performs PAM4 compliance test sweeps in a single pass for shorter test times, more reliable and repeatable results, and greater ease of use.
Tektronix, Inc., a leading worldwide provider of measurement solutions, announced it will fully outfit the Research and Development (R&D) lab for Raspberry Pi, a low-cost, high performance computer designer with the latest Tektronix high-speed test solutions. Raspberry Pi’s new laboratory will focus on high speed serial design and validation testing. The new test equipment from Tektronix delivers on their needs today while also ensuring enough bandwidth to support any future high speed interfaces that would require the highest performance instrumentation.
Tektronix, a leading worldwide provider of measurement solutions, today introduced the industry’s first 32 Gb/s protocol-aware bit error rate test and analysis system. The new Tektronix BSX series BERTScope not only helps characterize the receiver in Gen3 and Gen4 devices – it enables users to shorten the time needed to debug link training and bit error rate issues.
Tektronix, a leading worldwide provider of measurement solutions, today introduced the industry’s first receiver test solution with 100 percent coverage of the MIPI Alliance’s recently released D-PHY v.2.0 specification along with full support for the C-PHY v1.1 receiver test specification.