EDI CON Online
Title: Developing Wireless PCB Applications with EM Verification and an RF Design Flow
Date: October 13, 2020
Time: 12:00pm PT / 3:00pm ET
Sponsored by: Cadence
Presented by: Dr. John Dunn, Senior Product Marketing
Abstract:
Today’s PCB designers face multiple challenges incorporating RF/microwave, analog, and digital design elements together on the same PCB. To successfully integrate RF/microwave content and mixed-signal designs, PCB layout tools and RF circuit design software must exchange design data efficiently.
This workshop will address two aspects to successful RF PCB design, namely EM verification as well as RF/microwave IP creation. The Cadence® software platforms of Allegro® and AWR® will be showcases through several practical, real-world examples that demonstrate the need for a close link between RF circuit/EM co-design and enterprise-level manufacturing layout tools.
Presenter Bio:
Dr. John Dunn is an EM technologist with Cadence and spearheads the AWR training programs. Before entering the commercial electronics industry, Dr. Dunn was a professor of electrical engineering at the University of Colorado, Boulder, for 15 years. He earned his M.S. and Ph.D. degrees in applied physics from Harvard University, Cambridge, MA.
Please note:
To register for other EDI CON Online RF and microwave related events, please visit the Microwave Journal website.
By registering, you are agreeing to allow the data collected to be shared with Microwave Journal®, Signal Integrity Journal™, the speakers & the sponsors of this event. You may be contacted regarding the subject matter presented.
Workshop Sponsor
Platinum Sponsors