Industry News
Industry News RSS Feed RSS

Siemens Closes Mentor Graphics Acquisition

April 3, 2017
Siemens
0 Comments

With the recent closing of its acquisition of electronic design automation (EDA) software leader, Mentor Graphics Corporation (Mentor), Siemens sets out to underscore the significant customer value it envisions for both Electronic Systems and Integrated Circuit (IC) design tools. Mentor is now part of Siemens’ product lifecycle management (PLM) software business, making the combined organization the world’s leading supplier of industrial software used for product design, simulation, verification, testing and manufacturing.


Read More
Pico Technologies

Pico Technology Increases the Bandwidth of its PicoScope 9300 Family of Sampling Oscilloscopes

March 28, 2017
Pico Technology
0 Comments

Pico Technology has increased the bandwidth of its PicoScope 9300 family of Sampling Oscilloscopes with two new 25 GHz models.  The USB-controlled Sampling Oscilloscope, available only from Pico, stands as one of very few low-cost, high-integrity options for viewing and measuring RF and microwave signals, paths and networks. Sampling Oscilloscopes are the cost-effective solution to today’s proliferation of gigabit-per-second datastreams and their copper, wireless and optical fiber interconnect.


Read More
ADI ADP107

Analog Devices’ Integrated, Isolated Power Controller Series Reduces Design Complexity and Improves System Reliability

March 24, 2017
Analog Devices Inc.
0 Comments

Analog Devices, Inc. announced a series of three isolated pulse width modulation (PWM) controllers with integrated 5 kV isolation enabled by ADI’s award-winning iCoupler® technology. The ADP1071-1 and ADP1071-2 are isolated synchronous flyback controllers and the ADP1074 is an isolated synchronous active clamp forward controller.


Read More
Passive Plus

Passive Plus, Inc., Offers Extended Value Ranges for Traditional HI-Q/Low ESR Capacitors

March 22, 2017
Passive Plus Inc.
0 Comments

Passive Plus, Inc. (PPI) now offers extended-values for the Traditional NP0, Hi-Q 0505 (.055” x .055”) -- now available up to 1,000pF; and 1111 (.110” x .110”) -- now available up to 10,000pF (.01uF). The 0505 and 1111 have an increased Operational Temperature up to 200°C. These parts exhibit Low ESR/ESL, Low Noise, High Self-Resonance as well as ultra-stable performance over temperature. Usually used for wireless broadcasting equipment, mobile base stations, GPS, MRI, and radar applications and offered in magnetic and non-magnetic terminations.


Read More
MACOM

MACOM Announces PAM-4 Technology Chipset for Single Lambda 100G, 200G and 400G Data Center Optical Connectivity

March 22, 2017
MACOM Technology Solutions Inc.
0 Comments

MACOM Technology Solutions Inc. announced a complete PAM-4 technology chipset for 100G data rates over a single wavelength enabling single fiber and four-lane parallel fiber connectivity for 100G, 200G and 400G Ethernet applications. This chipset features a new transimpedance amplifier (TIA), transmit and receive clock and data recovery (CDR) devices and linear Electro-Absorption Modulated Laser (EML) driver module.


Read More

Anritsu to Demonstrate SWDM 100G Technology Over OM5 with CommScope and Finisar at OFC 2017

March 22, 2017
Anritsu
0 Comments

Anritsu Company announces it will host a 100G Shortwave Wavelength Division Multiplexing (SWDM) technology demonstration with CommScope and Finisar in its booth (#2819) during OFC 2017, held March 21-23 in Los Angeles. The demonstration, which will showcase 100G SWDM transmission over wideband multimode fiber (OM5), will feature the Anritsu Network Master™ Flex MT1100A field optical transport tester, along with the CommScope LazrSPEED® OM5 WideBand multimode fiber connectivity solution, and Finisar 100 Gbps SWDM4 QSFP28 optical modules.


Read More

Tektronix Provides Raspberry Pi with Measurement Solutions to Test and Develop Current and Next Generation High Speed Interfaces

March 21, 2017
Tektronix
0 Comments

Tektronix, Inc., a leading worldwide provider of measurement solutions, announced it will fully outfit the Research and Development (R&D) lab for Raspberry Pi, a low-cost, high performance computer designer with the latest Tektronix high-speed test solutions. Raspberry Pi’s new laboratory will focus on high speed serial design and validation testing. The new test equipment from Tektronix delivers on their needs today while also ensuring enough bandwidth to support any future high speed interfaces that would require the highest performance instrumentation.  


Read More

Teledyne LeCroy, Coherent Solutions, Anritsu and Oclaro showcase latest 400G test platform at OFC 2016

March 21, 2017
0 Comments

Teledyne LeCroy, Anritsu Company, Coherent Solutions Ltd. and Oclaro, Inc.  announced a new joint effort to demonstrate the highest performance single-carrier 16QAM signal generation and analysis capabilities available at 56Gbaud. The demonstration of the partners’ latest optical communications test equipment platform takes place at OFC 2016 in Anaheim, CA, USA in the Teledyne LeCroy booth #1115.


Read More